Products in this section: Wolf Teeth
Instruments, Forceps, Extractors
and Extracting Fulcrums. (Left click on the
product name or scroll down for further information.)
Extended Wolf Tooth Elevator
These elevators were
designed to be used with a speculum. Unlike most elevators, which are too
short when working with a speculum, these are 13" long which enables them
to easily reach the affected tooth. A set includes a right and left
configuration elevator.
Product Description
|
Stock #
|
Price
|
|
Extended Wolf Tooth Elevator Set (2)
|
#11321
|
$195.00
|
Swartz Wolf Tooth Elevator
Our most popular Wolf Tooth Elevator. German made; stainless steel.
Length 6-1/2"; Blade width 3/8".
Product Description
|
Stock #
|
Price
|
|
Swartz Wolf Tooth Elevator
|
#11210
|
$67.00
|
Adjustable Wolf Tooth Elevator
This adjustable wolf tooth elevator features an aluminum handle which holds a
stainless steel elevator blade. The blade's length can be shortened to
6" or extended to 9" and replaced when worn. Two blades are
available, an economy blade and a premium, German made blade.
Handles and blades are sold seperately.
Product Description
|
Stock #
|
Price
|
|
Adjustable Wolf Tooth Elevator Economy Blade Only
|
#11313
|
$15.00
|
|
Adjustable Wolf Tooth Elevator German Blade Only
|
#11314
|
$56.00
|
|
Adjustable Wolf Tooth Elevator Handle Only
|
#11317
|
$18.00
|
Martell Wolf Tooth Elevator
Martell Wolf Tooth Elevators have a weighted brass handle and stainless
steel blade to provide the perfect balance for removing hard to reach wolf
teeth. Two styles are available - straight and angled. They measure 3"
overall with a shaft length of 2". The ball handle is 1-3/8" in
diameter.
Product Description
|
Stock #
|
Price
|
|
Martell Wolf Tooth Elevator - Straight
|
#11318
|
$48.00
|
|
Martell Woff Tooth Elevator - Angled
|
#11319
|
$48.00
|
|
Martell Wolf Tooth Elevator Set
|
#11320
|
$96.00
|
Milk Tooth Elevators
German made, stainless steel. Large round handle, overall length
5-1/2", blade width 3/16".
Product Description
|
Stock #
|
Price
|
|
Milk Tooth Elevator
|
#11330
|
$64.00
|
Burgess Wolf Tooth Extractor Set
Different head sizes allow this instrument to" cap" the
wolf tooth. By rotating back and fourth the tooth can then be separated
from the alveolus. The additional angulated extension is useful on teeth
that are well set back. Stainless steel. Replacement parts are available.
Product Description
|
Stock #
|
Price
|
|
Burgess Wolf Tooth Extractor Set
|
#11340
|
$126.00
|
Wolf Tooth Forceps
Dr. Liautard pattern, length 10", stainless steel.
Product Description
|
Stock #
|
Price
|
|
Wolf Tooth Forceps
|
#11350
|
$75.00
|
Pritchard's Incisor Forceps
These premium quality stainless steel forceps feature serrated jaws and are
designed to remove incisors. They measure 9" overall with a 1" long
jaw. Imported from England.
Product Description
|
Stock #
|
Price
|
|
Pritchard's Incisor Forceps
|
#12510
|
$145.00
|
Root and Fragment Forceps
For removing tooth splinters and roots from an extracted tooth’s
socket. Available with either "sure grip" serrated jaws or new
"Ceram-A-Grip™" ceramic jaws for increased gripping power and longer
life. Stainless steel, 7 1/2" long overall with 3/4" long jaw which is
offset by 5/8". Available in premium quality German and Pakistan.
Product Description
|
Stock #
|
Price
|
|
Root & Fragment Forceps, German
|
#12110
|
$166.00
|
|
Root & Fragment Forceps
|
#12111
|
$59.00
|
|
Root & Fragment Forceps, Ceramic. Jaws
|
#12113
|
$86.00
|
Incisor/2nd Premolar Forceps
For removing incisors and second premolars. The somewhat narrower jaws of
this forceps make it easier to manipulate and its universal handle style enables
it to be used with either the right or left hand on both upper and lower teeth.
Available with either "sure grip" serrated jaws or new "Ceram-A-Grip™"
ceramic jaws. Stainless steel, 6 3/4" overall length with 7/8" long
jaw. Available in premium quality German and Pakistan.
Product Description
|
Stock #
|
Price
|
|
Incisor/2nd Premolar Forceps, German
|
#12210
|
$166.00
|
|
Incisor/2nd Premolar Forceps
|
#12211
|
$59.00
|
|
Incisor/2nd Premolar Forceps, Ceramic. Jaws
|
#12213
|
$86.00
|
Upper/Lower Separating Forceps
For separating and splitting juvenile incisors away from the adult teeth when
they have grown in behind or in front of them. The Root and Fragment Forceps can
be used to remove the juvenile teeth fragments. Stainless steel, 6 1/2"
overall length with 3/4" long jaw. German made with "sure grip"
serrated jaw.
Product Description
|
Stock #
|
Price
|
|
Upper/Lower Separating Forceps , German
|
#12310
|
$166.00
|
Molar Extractor With Fulcrum
This unique molar extractor is a reproduction of an instrument that was
manufactured by Haussman & Dunn in the early 1900's.
The built-in fulcrum is
easily and quickly adjustable to enable the dentist to select the proper amount of leverage.
It also enables this extractor to be used to remove both upper and lower
molars. This extractor features bulb handles,
measures 22" overall and is made from stainless steel .
Product Description
|
Stock #
|
Price
|
|
Molar Extractor With Fulcrum
|
#13530
|
$595.00
|
Molar/Incisor Extractor
These Molar Forceps are a reproduction of an instrument used since the early
1900’s. They are designed to remove hard to get at rear molars but can also be
used to remove incisors. These forceps are imported from England, made of
stainless steel and are 22 3/4" long.
Product Description
|
Stock #
|
Price
|
|
Molar/Incisor Extractor
|
#13610
|
$400.00
|
Root and Fragment Extractor
This is a reproduction of an instrument that was made by Haussman & Dunn
in the early 1900's. It features a long, narrow head with serrated jaws that
securely grasp roots and fragments that may remain after a molar is extracted.
This instrument measures 19" overall; the head extends to a depth of
1-1/2" and is approximately 3/8" in diameter at the tip. Made of
stainless steel .
Product Description
|
Stock #
|
Price
|
|
Root and Fragment Extractor
|
#13650
|
$395.00
|
Three Prong Molar Extractors
These Three-Pronged Molar Extractors are specifically designed to remove molars in
aged horses that have very little crown. They are also useful for removing
deciduous premolar caps in young horses. They are available in two
configurations; right and left (which refers to the side that has the single
tooth when it is viewed tooth side up from the front). They are normally used
with
the single prong to the lingual side
of the tooth. For
complete instrumentation it is recommended they be purchased in pairs.
These extractors are made of stainless steel and are 19" in length with
knurled handles. And, unlike
cheaper copies, they have a box joint for extra
strength.
Product Description
|
Stock #
|
Price
|
|
Three Prong Molar Extractor - Right
|
#13325
|
$423.00
|
|
Three Prong Molar Extractor - Left
|
#13324
|
$423.00
|
Four Prong Molar Extractors
The Four-Prong molar extractor is designed to remove teeth are irregular or
geriatric teeth that have a short crown.
They are available in two sizes, 15” and 19”.
The
15 inch version is built on a
smaller, thinner, very high strength, stainless steel frame.
It
is designed for ponies and miniature horses, but is strong enough to work well on large horses. The 19" Four Prong Extractors are
more universal.
They work well for removing molar caps on
young horses and molars on
middle aged horses. They also work well on some fractured molars, and
extremely well on geriatric horses.
Both extractors feature a box joint and are made of stainless steel in the
United States.
Product Description
|
Stock #
|
Price
|
|
Four Prong Molar Extractor - 15"
|
#14110
|
$360.00
|
|
Four Prong Molar Extractor - 19"
|
#13326-1 |
$425.00
|
OED Four Prong Cap Extractor
The OED Extractor is for removing both upper and lower caps. The four
prongs are designed to grab short-crowned or irregular caps.
The OED Four Prong extractor, at 14”
in length, is a smaller version of our 15” and 19” Molar Forceps.
Like them it features a box joint and is made of stainless steel in
the United States.
Product Description
|
Stock #
|
Price
|
|
OED Cap Extractor, 14”
|
#13315
|
$189.00
|
Gary’s Cap Extractors
These cap extractors are modifications of two of the most functional and
popular cap extractors ever made - the Reynold’s and Gowing’s. They offer
increased dexterity to easily remove even the most difficult teeth. Both
extractors are imported from England and made of stainless steel.
The Upper Extractor is patterned after the Reynold’s but with the
"hooks" and "horns" removed. Also, the curvature of the
handles has been modified to improve the grip and add leverage. The result is a
forceps which is lighter, more versatile in reaching hard to get caps and which
can be used in either hand. It is approximately 14" in overall length.
The Lower Extractor is patterned after the Gowing’s but has been modified
to improve its grip and balance. It is approximately 15 1/2" in
overall length.
Product Description
|
Stock #
|
Price
|
|
Gary’s Cap Extractor, Upper
|
#13410
|
$280.00
|
|
Gary’s Cap Extractor, Lower
|
#13420
|
$280.00
|
Reynolds Cap Extractors
The traditional instrument for extracting retained deciduous teeth
(caps). Can also be used to remove small premolars and incisors. These
extractors feature a box joint, are 15 1/2" in length and made of
stainless steel. Made in Pakistan.
Product Description
|
Stock #
|
Price
|
|
Upper Reynolds Cap Extractor
|
#13110
|
$105.00
|
|
Lower Reynolds Cap Extractor
|
#13120
|
$105.00
|
Hewson's Extractor
The Hewson's Extractor is a reproduction of an extractor that was
first made in the early 1900's. It features serrated jaws that grip
the tooth tightly for greater leverage and is designed primarily for
removing caps. It can, however, also be used to remove small molars. Its head is 7/8" long and 1-1/4"
wide. It is 13" long overall, has box jaws
and is made in England of stainless steel.
Product Description
|
Stock #
|
Price
|
|
Hewson's Extractor
|
#13310
|
$224.00
|
Capp's Extractor
The Capp's Extractor has serrated jaws and is similar to a Hewson's
Extractor. However, it has straight
handles and a larger head (3/4" long by 1" wide) that makes it more of a
universal extractor 
Product Description
|
Stock #
|
Price
|
|
Capp's Extractor
|
#13320
|
$425.00
|
|
Capp's Extractor with Fulcrum
|
#13330
|
$485.00
|
Molar Separator/Spreader
We offer a Universal Upper/Lower Molar Separator/Spreader for loosening teeth prior to
extraction. It is available with either the standard thicker head or with
the new thinnr head. These instruments replace the traditional Upper and
Lower spreaders and are a combination of the two. It can be used on most
upper and lower molars. They are made in the United States of stainless
steel. They measure 22" in length and have a box jaw for extra
strength.
Product Description
|
Stock #
|
Price
|
|
Molar Separator/Spreader, Thick Head
|
#14130
|
$455.00
|
|
Molar Separator/Spreader, Thin Head
|
#14130-01
|
$455.00
|
The Standard Fulcrum has two different sized heads that are small and
thin enough to fit easily into the arcade. They are slightly offset from ninety
degrees to allow easier placement by an assistant. The two heads can be used in
either side of the jaw and allow for either 1/2" or 3/4" elevations.
The fulcrum is made of stainless steel and measures 19" overall.
The
Three-Headed Fulcrum has three exchangeable heads of different sizes to
give the practitioner a wide choice of extracting angles. The heads swivel for
ease of placement on the arcade and slide easily off the body when they need to
be changed. The body of the fulcrum measures 14" long and has a ball handle
on one to provide a secure grip. It is made of stainless steel. The fulcrum
heads measure 1/2", 5/8" and 3/4" high and are made from brass to
minimize enamel chipping. The have a broad flat base to engage more than one
tooth at a time and can be used on all arcades.
Product Description
|
Stock #
|
Price
|
|
Extracting Fulcrum
|
#13700
|
$102.00
|
|
Three Headed Fulcrum
|
#13730
|
$171.00
|
